Table of Contents
Advertisement
Quick Links
4-269-373-E1(1)
Speaker Attachment
Bracket
Operating Instructions
WS-32SE1B/WS-40SE1B/WS-46SE1B
Thank you for purchasing this unit.
This manual explains important safety instructions to prevent accidents and operating
instructions for this unit. Read this manual carefully and use this unit safely.
Once you have read this manual, make sure you keep it for future reference.
©2011 Sony Corporation
Advertisement
Table of Contents
Related Manuals for Sony WS-32SE1B
Summary of Contents for Sony WS-32SE1B
-
Page 1: Operating Instructions
This manual explains important safety instructions to prevent accidents and operating instructions for this unit. Read this manual carefully and use this unit safely. Once you have read this manual, make sure you keep it for future reference. ©2011 Sony Corporation... -
Page 2: About This Manual
WS-32SE1B/WS-40SE1B/WS-46SE1B. The illustrations used in this manual are of the Do not drop the WS-32SE1B model and they may be different from products or install your model. Any differences in operation are them where there is a marked in the manual as “WS-32SE1B model only”. - Page 3 Doing so product. may cause a fire or electric shock. • The WS-32SE1B/WS-40SE1B/WS-46SE1B • Keep flammable objects or open flames (e.g., speaker attachment bracket is designed for use candles) away from the products.
-
Page 4: Table Of Contents
Clean with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzine or alcohol. If you have any questions or problems concerning this product, please consult your nearest Sony dealer. -
Page 5: Unpacking
• Operating Instructions (this manual) • Cable clamp (F) (2) • Compatible list (1) • Attachment bracket (A) – 32 A (For WS-32SE1B) (1) • Support belt (G) (1) – 40/46 A (For WS-40SE1B/WS-46SE1B) • Screw for support belt (+PSW M4 × 10 mm) (H) (1) •... -
Page 6: Setting Up
Setting Up You can use this speaker attachment bracket to install the TV Sound Bar System on the TV stand. Notes • This speaker attachment bracket is designed for use with the stand supplied with TV only. • This speaker attachment bracket cannot be used with the SU-FL71M/SU-FL71L floor stand. •... - Page 7 Remove the screws from the original neck, then detach the original neck from the TV stand. Original neck Stand base Screws for the stand • The 32 inch and 40 inch model: 2 screws • The 46 inch model: 3 screws Install the extension neck for TV stand (B) to the TV stand using the screws removed in step 2.
- Page 8 Remove the screw on the rear cover of the TV Sound Bar System, then remove the rear cover. Rear cover TV Sound Bar System Mount the attachment bracket (A) to the TV Sound Bar System with the screw for attachment bracket (+PSW M5 × 12 mm) (C). Check the engraving on the rear of the attachment bracket and use a suitable bracket for the TV.
- Page 9 Remove the screws from the rear of the TV. Be sure to place the TV on a soft thick cloth with the TV screen facing down to prevent damaging the surface of the LCD. The screws at the rear of the TV Cloth Mount the TV Sound Bar System to the TV with the screw for attachment bracket (Silver) (D).
- Page 10 Attach the TV to the TV stand. Match the screw protrusion to the notch on the TV stand. Note When attaching the TV to the TV stand, make sure to hold the TV instead of the TV Sound Bar System. Secure the TV to the TV stand with the screw for TV stand head (+PSW M5 ×...
-
Page 11: Preventing The Tv From Toppling Over
Preventing the TV from toppling over As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in serious injury. Warning To avoid injury, place the TV Sound Bar System-installed TV less than 25 cm from the wall, and firmly secure the TV to the wall. - Page 12 Securing the TV to a wall Prepare a strong string or chain (not supplied) and a fastener (not supplied) for fastening to the wall. Secure the fastener to a reinforced wall. Even if you have secured the TV to the rack, be sure to secure it to a wall by following this procedure.
-
Page 13: Adjusting The Angle Of The Tv
Secure the fastener to the reinforced wall (1), and then thread the string or chain through the holes of the anchor bolt and the fastener (2). Firmly tie both ends of the string or chain together. Less than 25 cm Less than 25 cm TV installed on the floor TV installed on a rack... -
Page 14: Specifications
Specifications Attachment bracket 32 A Dimensions (w/h/d) (approx.) 250 mm × 216 mm × 35 mm Mass (approx.) 1.1 kg Attachment bracket 40/46 A Dimensions (w/h/d) (approx.) 334 mm × 227 mm × 35 mm Mass (approx.) 1.3 kg Attachment bracket 40/46 B Dimensions (w/h/d) (approx.) 332 mm ×... - Page 16 0466-31-2531 From Mobile phone, PHS, and service. some IP phone * Contact to this Sony service for consulting to purchase the Operating Instructions, Remote, etc. Fax (for both service): 0120-333-389 Sony Corporation 1-7-1, Konan, Minato-ku, Tokyo, 108-0075, Japan Sony Corporation...