GE Appliances JV936 Owner's Manual And Installation Instructions page 11
Hide thumbs
Also See for Appliances JV936:
- Owner's manual and installation instructions (48 pages) ,
- Operating instructions manual (44 pages) ,
- Owner's manual & installation instructions (48 pages)
Table of Contents
Advertisement
Available languages
Available languages
Installation Instructions
PARTS PROVIDED
Locate the hardware accessory box packed with the hood
and check contents.
2 Aluminum
Grease Filters
Screws, wall
fasteners,
Duct Transition
washers
with Damper
Filter
Support
DUCT COVER REQUIREMENTS
We recommend that the vent hood and decorative duct
cover (ifused)be on site before final framing and wall
finishing. This will help to accurately locate studs, ductwork,
and electrical service. Readthese instructioins to determine
if the duct cover accessory can be used for your installation
situation.
Duct Cover Accessory:
.
Use the decoroative duct cover to conceal ductwork
running from the top of the hood to the ceiling.
. The duct cover accessory
consists of 2 pieces.The
outside piece is 12" high,
the inside piece is 22"
12"
Nested together they are
I
24" min. expanding to a total
maximum height of 34".
22"
. The outside piece can be
_
12"
used alone to fill a 12"
height.
.
For heights over 12",the
ceiling bracket must be
<"_
installed to secure the cover
•12"
at the top.
11"
To avoid unsightly gaps, plan
the hood installation height for duct cover use.
. The cover will fit a 12" min. height from the top of the
hood to the ceiling or 24" min. and expanding up to 34"
from the top of the hood to the ceiling.
THE DUCT COVER CANNOT BE USEDWHEN THE DISTANCE
ABOVETHETOPOF THE HOOD IS BETWEEN12" AND 24".
Reviewthe following examples to ensure a trouble free
installation using the duct cover
8 ft.
Ceiling
accessory.
A
8ft. Ceilings:
::z_r-.12"
The hood must be installed
II
I1_ _ €
at 30" above the cooking
surface (or 66" above the
floor), the duct cover will not
fit if the hood is isntalled at
t
a lower or higher height.
Usethe outside 12" section,
so"
discard the inside section.
--11
] F--
9 ft. Ceiling
t
so"
24"
--!
I
I r
--I
I
t I_
9 ft Ceiling: Install the hood 24" min. and up to a maximum
of 30" above the cooking surface. The duct cover will expand
to reach ceiling height.
36" Max
1F
--11
iF--
10 ft. Ceiling: Install the hood 32" min to 36" max. above the
cooking surface. The duct cover will expand to a maximum
of 34" above the top of the hood to meet the ceiling.
11
Advertisement
Table of Contents
