Table of Contents
Advertisement
installing the hood
•
Removethe hood.
Drive "lower" wood screws, by hand. Remove
screws.
Mount the hood onto the "upper" screws.
Drive and tighten the "upper" wood screws, by
hand.
Drive and tighten the "lower" wood screws, by
hand.
Air deflector in_allation
{Recirculating
accessories)
= Assemble the air deflector with the duct cover
bracket with 4 assembly screws provided as
shown.
S
C7_
Connecting
the ductwork
= Install ductwork, making connections in the
direction of airflow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
Make the same connection in the wall or ceiling
vent exit.
Airflow
Measure from the bottom of the air deflector to
the bottom of the hood outlet, as shown.
]
-
t
Dimension
to measure
I
Duct
tape
over
seam
Cut the duct at the measured size.
Uninstall the air deflector removing the 4
assembly screws.
Slip the duct onto the bottom of the deflector.
Place the assembled deflector and duct over the
exhaust outlet from the hood.
Assemble the air deflector to the duct cover
bracket with 4 assembly screws provided as
shown.
Advertisement
Table of Contents
