Sony CCD-TRV30 Operation Manual

Video camera recorder

Hide thumbs Also See for CCD-TRV30:

Operation manual (29 pages)

Limited warranty (1 page)

Service manual (39 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Sony CCD-TRV30

Page 1 The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CCD-TRV Model No. AC-V Serial No.
Page 2 You will soon be producing home video that you can enjoy for years to come. For the Sony Service Center nearest you call 1-800-222-SONY (United States only).
Page 3 Before You Begin Checking Your Model Number Checking Supplied Accessories Getting Started Charging and Installing the Battery Pack Inserting a Cassette ° Basic Operations Camera Recording Using the Zoom Feature Shooting with the LCD Screen Hints for Better Shooting Checking the Recorded Picture Playing Back a Tape 19 Searching...
Page 4 The instructions in this manual are for the two models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The CCD~TRV30 is the model used for illustration purposes.
Page 5 Check that the following accessories are supplied with your camcorder. 5" 15J AC-V26 o" ® AC-Vl 5/V16/V16A "o Wireless remote commander (1) (P.21, 55) NP-66 Battery pack (1) (p.6) Shoulder strap (1) (p.55) A/V connecting cable (1) (p.34, 36) AC-V26/V15/V16/V16A AC power adaptor (1) (p.6, 23) Size AA (R6) Battery for Remote Commander (2) (p.56)
Page 6 Getting Started Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC power adaptor. Charging the Batte_ Pack • iii _ I i_ !_ Charge the battery pack on a flat place without vibration.
Page 7 Charging Time NP-66 _NP'CG5 ' NP-60D NP-80i_D NP-98/g8D Battery pack (supplied) Charging time* €_ ' * Approximate minutes to charge an empty battery pack using the supplied AC power adaptor (Lower temperatures require a longer charging time.) 5" Battery Life CCD-TRV30 5"...
Page 8 Important! Use the battery completely before recharging! Before you recharge the battery, make sure the battery has been used up (discharged) completely. Repeated charging while some capacity remains causes a lowering of battery capacity. However, the original battery capacity can be recovered if you use the battery completely and charge it fully...
Page 9 Installing the Battery Pack (1) Lift up the viewfinder. (2) Align the right side of the battery pack with white line on the camcorder, and slide the battery pack to the right. t"l :3" 5" Removing Battery Pack "D (1) Lift up the viewfinder. (2) While pressing BAT]', slide the battery pack to the left.
Page 10 Make sure that a power source is installed. (1) While sliding the lid release knob, lift up the lid. Then open it. (2) Press EJECT. The cassette compartment automatically lifts up and opens. (3) Insert a cassette (not supplied) with the window facing out.
Page 11 Basic Operations Make sure that the power source is installed and a cassette is inserted. When you use the camcorder the first time, reset the date and tie before you start recording (p.38). This date is automatically recorded for 10 seconds after you start recording (AUTO DATE feature).
Page 12 Note on beep sound As indicated by the .h mark in the illustrations, a beep sounds when you turn the power on or when you start recording and two beeps sound when you stop recording, confirming the operation. Several beeps also sound as a warning of any unusual condition of the camcorder (p.59).
Page 13 •Using me Zoom Feature Zooming is a recording technique that lets you change the size of the subje_in the scene. For more professional-looking recordings, use the zoom sparingly. "T" side: for telephoto (subject appears closer) "W" side: for wide-angle (subject appears farther away) 5"...
Page 14 Shooting with the LCD Screen You can also record the picture while looking at the LCD screen. When using the LCD screen, the viewfinder screen turns off automatically. You cannot monitor the sound from the speaker during recording. (1) While pressing PUSH OPEN, open the LCD panel. (2) Adjust the angle of the LCD panel.
Page 15 © Using the mirror mode, you can record yourself while watching yourself on the LCD. [¢] While recording in the mirror mode, you can also use the viewfinder so that you can record a person while letting him/her monitor the shot. [d] 5"...
Page 16 For hand-held shots, you'll get better results by holding the camcorder according to the following suggestions. • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate controls with your thumb. • Place your right elbow against your side.
Page 17 When attaching a non-Sony tripod, make sure that the length of the tripod screw is less than 9/32 in. (6.5 mm). Otherwise, the screw may damage the inner parts of the camcorder.
Page 18 The EDITSEARCH function is used to view the recorded picture for a moment during recording. Using EDITSEARCH, you can review the last recorded scene or check the recorded picture on the LCD screen. You can also review the picture in the viewfinder. (1) While pressing the small green button on the POWER switch,...
Page 19 You can monitor the playback picture on the LCD screen. (1} While pressing the small green button on the POWER switch, turn it to VTR. The operation keys light on. (2) Insert the recorded tape with the window facing out. (3) While press PUSH OPEN, open the LCD panel.
Page 20 To Stop Playback Press [] during playback. To Rewind Tape Press _. To Fast-forward Tape Press It_. When watching on the LCD screen Turn the LCD panel vertically until it clicks, turn it over and move back to the body. [a] You can use the stand.
Page 21 You can enjoy pictures with little noise on the LCD screen during still, slcf_ and picture search. (CRYSTAL-CLEAR still/slow/picture search) To View a Still Picture (Playback pause) Press II during playback. To resume playback, press U or 12>. To Locate a Scene (Picture search)
Page 22 You can go to the end of the recorded portion. Press END SEARCH after you record and play back the tape. The tape starts rewinding or fast-forwarding and the last 3 seconds of the recorded position plays back. Then the tape stops at the end of the recorded picture (End Search).
Page 23 Advanced Operations You can choose any of the following power sources for your camcorder: battery pack (p.6), house current, and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder. Indoors House current Supplied AC power...
Page 24 AC-V15/V16/V16A WARNING Power cord must only be changed at qualified service shop. PRECAUTION The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the set itself has been turned off.
Page 25 You can record the date or time displayed on the LCD screen or in the viewfinder with the picture. You cannot record the date and time at the same time. Except for the date or time indicator, no indicator on the LCD screen or in the viewfinder is recorded.
Page 26 When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The I_ indicator appears inside the view finder or on the LCD screen. [a] Subject is too dark because of backlight.
Page 27 You can select from four PROGRAM AE (Auto Exposure) modes to suit your shooting situation. When you use PROGRAM AE, you can get a Portrait effect (the subject is in fnr_1_ harl_c_round is out anr'l of focus), capture high-speed action or record night views. Select one of four modes, referring to the following.
Page 28 You can fade in or out to give your recording a professional appearance. When fading in, the picture gradually fades in from black or mosaic while the sound increases. When fading out, the picture gradually fades to black or mosaic while the sound decreases. When Fading in [a]...
Page 29 You can make interesting pictures, like those of television with Picture Eff_t function. SEPIA MOSAIC The picture becomes mosaic. The picture is sepia. SOLARIZE NEG. The color of the picture is reversed. The light intensity is more clear, and the picture looks like a painting.
Page 30 Each press of PICTURE EFFECT changes the mode. Repeat pressing until the desired mode appears. The indicator of the selected PICTURE EFFECT mode appears in the viewfinder or on the LCD screen. The SLIM and STRETCH modes appear after the NEG. ART mode on the CCD-TRV40. I MOSAIC SOLARIZE ._ J...
Page 31 iFor Model with STEADY SHOT Switch (CCD-TRV40 only) When you shoot, the ((_))indicator appears in the viewfinder or on the LCD screen. This indicates that the STEADY SHOT function is working and the camcorder compensates for_mera-shake. You can release the STEADY SHOT function. Do not use the STEADY SHOT function such as when shooting stationary...
Page 32 You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder. The menu contents of CAMERA mode are different from those of VTR mode. (1} While pressing PUSH OPEN, open the LCD panel. (2) Press MENU to display the menu on the LCD screen.
Page 33 Items in CAMERA VTR Modes COMMANDER <ON/OFF> • Select ON when using the supplied wireless Remote Commander for the camcorder. • Select OFF when not using the Remote Commander for the camcorder. ,BEEP <ON/OFF> • Select ON to turn the beep sound on. •...
Page 34 You can use the camcorder as a VCR. Connect the camcorder to the TV by using the supplied connecting cable. There are two ways to connect the camcorder to your TV. When monitoring playback picture by connecting the camcorder to your TV, we recommend you use the house current the power source...
Page 35 You can create your own video programme by editing with any other 1_ 8 mm, HI [] Hi8, !_ VHS, S-VHS, _ VHSC, _ S-VHSC, or Il! Betamax VCR that has video/audio inputs. Connect the camcorder to the VCR using the supplied A/V connecting cable.
Page 36 You can record a tape from another VCR or a TV program from a TV that has video/audio outputs. Connect the camcorder to the TV or VCR. Turn down the volume of the camcorder while editing. Otherwise, the picture distortion may occur.
Page 37 Additional Information Your camcorder is supplied with the lithium battery installed. When the battery becomes weak or dead, _ indicator flashes in the viewfinder or on the LCD screen for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with the S(uW CR2025 or Duracell...
Page 38 You can reset the date and time in the menu system in CAMERA mode. (1) While pressing PUSH OPEN, open the LCD panel. (2) Press MENU to display the menu on the LCD screen. (3) Press I' or 4, to select CLOCK SET (p.33), then press EXECUTE. (4) Press I"or 4, to adjust the year, and then press EXECUTE..
Page 39 playback mode (SP or LP) is selected automatically according to the format in wlhich the tape has been recorded. The quality of the recorded picture in LP mode, however, will not be as good as that in SP mode. LP (long play) mode When you play back a tape recorded in LP mode, the LP indicator lights up in the viewfinder or on the LCD screen.
Page 40 While you are using your camcorder, the remaining battery indicator in the viewfinder or on the LCD screen decreases gradually as battery power is used up. When the remaining battery indicator reaches the lowest point, the _ indicator appears and starts flashing in the viewfinder or on the LCD screen.
Page 41 The Life of the Battery Pack If the _X_indicator flashes rapidly just after turning on the camcorder with a fully charged battery pack, the battery pack should be replaced with a new fully charged one. Charging Temperature You should charge batteries at temperatures from 50°F to 86°F (from 10°C to 30°C).
Page 42 If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate correctly.
Page 43 "- Slightly dirty [b]-Very dirty _° If this happens, clean the video heads with the Sony V8-25CLH cleaning cassette (not supplied). After checking the picture, if it is still "noisy", repeat the cleaning. (Do not repeat cleaning more than 5 ¢D...
Page 44 • Should any solid object or liquid get inside the casing, unplug the camcorder and have it checked your nearest Sony dealer before operating it any further. • Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Page 45 This is normal. • Do not place the unit in locations that are: - Extremely hot or cold - Dusty or dirty - Very humid - Vibrating If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.
Page 46 Each country has its own electricity and TV color systems. Before using your camcorder abroad, check the following points: Power Sources You can use your camcorder in any country with the supplied AC power adaptor within 110 V to 240 V AC, 50/60 Hz.
Page 47 Should the difficulty persist, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. Camcorder Cllu_ Symptom Corrective Actions Page The power is not on.
Page 48 EDIT is set to ON in the menu Set it to OFF. The playback picture is not clear. system. Clean the heads using Sony V8- The picture is "noisy". The video heads may be dirty. 25CLH cleaning cassette. Close the LCD panel.
Page 49 The problem is with the AC power The CHARGE lamp flashes. adaptor. Please contact your nearest Sony Dealer. If you use a battery pack which you have just bought or which has been left unused for a long time, the CHARGE lamp may flash at the first charging.
Page 50 TTL autofocus system in.ner 10 V, 1.1 A in charge mode Minijack focus wide macro system Application LANC jack CCD-TRV30:12 x Sony battery packs NP-66, NP- Stereo mini-minijack (o 2.5 mm) CCD-TRV40:24 x (Digital) 60D, NP-C65, NP-68, NP-80/80D, MIC jack 12 x (Optical)
Page 51 "o [] Built-in microphone [] Tape transport buttons (p.19, 20, 21) [] STOP [] Power zoom button (p.13) ¢D REW (rewind) [] Viewfinder adjustment ring (p.12) [:::>PLAY (playback) FF (fast forward) [] FADER button (p.28) | | PAUSE [] Viewfinder (p.12, 44, 58) •...
Page 52 CCD-TRV40 [] TIME button (p.25) [] DATE button (p.25) [] Speaker [] Recording lamp (p.14) [] LCD screen (p.19, 58) DISPLAY button (p.20) [] STEADY SHOT switch (CCD-TRV40 only) (p.31) END SEARCH button (p.22) COUNTER RESET button (p.12) [] VOL (speaker volume) control (p.19) MENU operation buttons (p.32, 38) PICTURE EFFECT button (p.30)
Page 53 START/STOP button (p.14) It is useful when recording in a low position. LCD BRIGHT dial (p.14) [] Tripod receptacle (p.17) Attach the supplied tripod adaptor so that a tripod (not supplied) can be attached in good "o balance. Stand (for recording) (p.17) Stand (for playback) (p.20) PUSH OPEN button (p.14, 19) Eyecup...
Page 54 [] Lithium battery compartment (p.37) Cassette compartment lid (p.10) Grip strap (p.16) EJECT button (under the lid ) (p.10) [] Cassette compartment lid release knob LANC _ control jack Connect the LANC t_ connecting cable to a MIC (microphone) jack wired remote contro_ unit such as an editing Connect an optional...
Page 55 Attaching the shoulder strap Attach the supplied shoulder strap to the hooks for the shoulder strap (_--_on page 53). Remote Commander The buttons that have the same name on the Remote Commander and on the camcorder function identically. "U [] Transmitter Point toward the remote sensor to control...
Page 56 Preparing Remote Commander To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA (R6) batteries. (1) Remove the battery cover from the Remote Commander. (2) Insert both of the size AA (R6) batteries with connect polarity. (3) Put the battery cover back onto the Remote Commander.
Page 57 VTR 2. The commander mode (1, 2, and 3) are used to distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR at commander mode VTR 2, we recommend you change the commander...
Page 58 In the vie_n_r and on _ S_en Z:_--J IAUTO DArE I I_Remaining tape indicator (p.12) PROGRAM AE mode indicator (p.27) Steady Shot indicator (CCD-TRV40 only) (p.31) ..._11 I I/.,. 5rain lmin -I_ -_umin_- I 1\ Back light indicator (p.26) [] Remaining battery indicator (p.40) [] Picture effect indicator (p.29) [] Power zoom indicator (p.13)
Page 59 [] The video heads may be contaminated (p.43). [] Some other trouble has occurred. Disconnect the power source and contact your Sony dealer or local authorized facility. [] The lithium battery is weak or the lithium battery is not installed (p.37)
Page 60 DATE / TIME ......Picture effect ......29 DEMO ........Playback on TV ...... 34 DISPLAY ......... Playback pause ...... 21 Portrait mode ......27 Power sources ......23 Power zoom ......PROGRAM AE ...... 27 Sony Corporation Printed in Japan...

This manual is also suitable for:

Handycam ccd-trv40 Handycam ccd-trv30

Sony CCD-TRV30 Operation Manual

Quick Links

Related Manuals for Sony CCD-TRV30

Summary of Contents for Sony CCD-TRV30

This manual is also suitable for:

Table of Contents