Sony BDV-E980 Manual page 68
Blu-ray disc/dvd home theatre system
Hide thumbs
Also See for BDV-E980:
- Quick setup manual (2 pages) ,
- Operating instructions manual (80 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Sound
Symptom
Problems and solutions
There is no sound.
• The speaker
cord is not connected
securely.
• Check the speaker
settings (page 49).
The Super Audio CD sound of a • HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains
component
that is connected
to
copy protection.
Connect
the analog audio output
of the component
to the
the HDMI (IN 1) or HDMI (IN
AUDIO
(AUDIO
IN L/R) jacks of the unit.
2) jack is not output.
There is no sound from the TV
via the HDMI (OUT)jack
when
using the Audio Return Channel
function.
• Set [Control for HDMI]
in [HDMI Settings]
of [System
Settings]
to [On]
(page 61 ). Also, set [Audio Return
Channel]
ill [HDMI Settings]
of [System
Settings]
to [Auto] (page 61 ).
• Make sure that your TV is compatible
with the Audio Return Channel
function.
• Make sure that an HDMI cable is connected
to a jack on your TV that is
compatible
with the Audio Return Channel
function.
The system does not output
• Set [Audio Return
Channel]
in [HDMI Settings]
of [System
Settings]
to [Off]
sound correctly
when connected
(page 61 ).
to a set-top box.
Severe
hum or noise is heard.
• Move your TV away l¥om the audio components.
• Clean the disc.
The sound loses stere() effect
• Select stereo sound by pressing
AUDIO
(page 43).
when you play a CD.
The sound comes from the center
• Depending
on the disc, the sound may come from the center speaker
only.
speaker
only.
No sound or only a very low-
• Check the speaker connections
and settings
(pages 20, 49).
level sound is heard from the
• Check the surround
setting (page 31 ).
surround
speakers.
• Depending
on Ihe source, Ihe elYect of tile surround
speakers
may be less
noticeable.
• A 2 channel
source
is being played.
Distortion
occurs
in the sound of • Reduce the input level for the connected
component
by setting [Attenuate
-
a connected
component.
AUDIO]
(page 59).
Tuner
Symptom
Problems and solutions
Radio stations
cannot be tuned
• Check that the antenna
(aerial)
is connected
securely.
Adjust the antenna
in.
(aerial) or connect
an external
antenna
(aerial) if necessary.
• The signal strength
of the stations
is too weak (when tuning ill with automatic
tuning). Use manual tuning.
Playback
Symptom
Problems and solutions
Tile disc does not phty.
•The region code on the BD/DVD
does not match tile system.
•Moisturc
has condensed
inside the unit and may cause damage
to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
• The system cannot play a recorded disc that is not correctly
finalized
(page 71 ).
File names are not displayed
• The system
can only display
ISO 8859-1-compliant
character
formats. Other
correctly,
character
formats
may be displayed
diffcrently.
• Depending
on the writing software
used, the input characters
may be displayed
differently.
68u_
Hide quick links:
Advertisement
Table of Contents
