Table of Contents
Advertisement
One Touch Recording
One touch recording
lets you record up to four hours or to the end of the tape without
programming
the timer. You can begin recording immediately.
The TV/VCR will stop
automatically
at the end of the recording.
How
to Use
One
Touch
Recording
1. Insert a tape with safety tab in place.
The TV/VCR will turn on.
2.
Select the channel to be recorded.
If recording from the AUDIO/VIDEO INPUT jacks,
press INPUT or 00 to select the line input (VIDEO).
3.
Press SPEED to select a recording
speed.
You can also change the speed of the recording
in progress.
4..Press
REC to activate recording.
5. Press REC repeatedly until the desired amount of
recording time is displayed.
Each time you press REC, the recording time increases
by 30 minutes -- up to tape end.
RECORD
LENGTH
0:00
Ch
04
Press
REC
to
set
Length
Display
Press
REC
0-2;0
1:00
1:30
_00
3:00
4:00
Tape end
0:00
Recording
Time
(30 Min)
(1 Hr)
(1 Hr, 30 Min)
(2 Hrs)
(3 Hrs)
(4 Hrs)
(Tape end)
(Turns Off)
The indicator
in the REC button on the TV/VCR's
front panel will light during recording.
During one touch recording,
press REC to display the
time remaining on the screen. Press REC again to
increase
the recording time.
Stopping
a One
Touch
Recording
in Progress
Press and hold STOP/EJECT on the TV/VCR
or STOP on
the remote for a few seconds
to stop the recording.
-- OR
Repeatedly press REC until RECORD LENGTH 0:00
appears. The recording stops after a few seconds.
19
Hide quick links:
Advertisement
Table of Contents
