Table of Contents
Advertisement
Playing
a Tape
1.
Tune the TV to your VCR viewing
channel (3, 4, or TV's video
line input- see "How to Find Your TV's Video Input Channel"
in the References
section for more about the video line
input).
2.
Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
Press FWD or REV to position the tape.
Press PLAY,PAUSE (if necessary) on the VCR (PLAY on
remote) to begin tape play.
Press PLAY,PAUSE (PAUSE on remote) for stop action.
Press TRACK up or down to remove any streaks from the
picture, if necessary.
Press STOP.EJECT on VCR (STOP on remote) to stop
playback.
Automatic
Rewind
The VCR automatically
rewinds the tape if it reaches the end of
the tape during playback. While rewinding,
you can press
POWER and the VCR will turn off after rewinding.
Tape Eject
Press STOP,EJECT on the VCR (STOP on the remote control) for
three seconds when in STOP mode to eject the tape. A tape can
be ejected even when the VCR is off.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Automatic
Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR's power is
turned on.
22
Advertisement
Table of Contents
