Clock shows
incorrect
time or date
•
Power interruption.
•
Check to make sure the clock is set accurately
(check AM/PM and date).
•
Check Auto DST setting. The clock may have adjusted
for daylight-saving
time.
Time did not adjust for daylight-saving
time
•
Check to make sure Auto DST feature is turned on.
VCR makes noise when stopped
•
VCR is removing
tape from heads. This is normal. The head cylinder
inside the VCR will continue
to rotate for a few
minutes
after you put the VCR in the stop mode.
W'dl not Auto Channel
Search active channels
correctly
•
Check to make sure the antenna connections
are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA
feature is set correctly.
•
If Detect Automatically
was selected for the Signal Type in the Auto Channel Search menu, try using either CABLE TV
or ANTENNA
instead.
•
May not need to auto channel search if using a cable box. Refer to the VCR Channel List or contact your cable
company for more information.
Cannot
add or remove
channels
•
Channels must be placed in memory
using the AUTO CHANNEL
SEARCH feature before channels can be added or
removed
from channel memory.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot
select channels
over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA
feature is set to CABLE.
Cassette
with safety tab removed
does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator
flashes
•
Check to make sure there is a cassette in the VCR when a timer recording
is set.
On-screen
menus
appear
in
English, French, or Spanish
•
Check Language feature.
53