W'dl not Auto
Channel
Search
active
channels
correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the SignalType: CABLE/ANTENNA
feature is set correctly.
•
If Detect Automatically
was selectged for the SignalType in the Auto Channel Search menu, try using either CABLE'IV
or ANTENNA
instead.
•
May not need to auto channel search if using a cable box. Refer to the VCR Channel List or contact your cable
company for more information.
Cannot
add or remove
channels
•
Channels must be placed in memory using the AUTO CHANNEL SEARCH feature before channels can be added or
removed from channel memory.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if SignalType: CABLE/ANTENNAfeature is set to CABLE.
Cassette
with safety tab removed
does not start to play automatically
•
Checkto make sure the Auto Play ON/OFF feature is set to ON.
TIMER
indicator flashes
•
Checkto make sure there is a cassette in the VCR when a timer recording is set.
On-screen
menus appear
in an incorrect
language.
•
Use the Language feature to change the on-screen display language.
5O