Capture An Image - Nokia 5800 XpressMusic User Manual
Hide thumbs
Also See for 5800 XpressMusic:
- User manual (332 pages) ,
- Guía del usuario (131 pages) ,
- Getting started (31 pages)
Table of Contents
Advertisement
— Select the scene.
or
— Switch between video and image mode.
or
— Show or hide the viewfinder grid (images only).
— Activate the self-timer (images only).
— Activate sequence mode (images only).
— Open Gallery.
Image settings:
— Select a colour effect.
— Adjust the white balance. Select the current lighting
conditions. This allows the camera to reproduce colours more
accurately.
— Adjust the exposure compensation (images only). If
you are shooting a dark subject against a very light
background, such as snow, adjust the exposure to +1 or +2
to compensate for the background brightness. For light
subjects against a dark background, use -1 or -2.
— Adjust light sensitivity (images only). Increase the light
sensitivity in low light conditions to avoid too dark images
and blurry images. Increasing the light sensitivity may also
increase the image noise.
— Adjust contrast (images only). Adjust the difference
between the lightest and darkest parts of the image.
— Adjust sharpness (images only).
The screen display changes to match the settings you define.
© 2011 Nokia. All rights reserved.
The capture settings are shooting-mode specific. Switching
between the modes does not reset the defined settings.
If you select a new scene, the capture settings are replaced
by the selected scene. You can change the capture settings
after selecting a scene if needed.
Saving the captured image may take longer if you change the
zoom, lighting, or colour settings.
Capture an image
When capturing an image, note the following:
● Use both hands to keep the camera steady.
● The quality of a digitally zoomed image is lower than that
of a non-zoomed image.
● The camera goes into battery saving mode after about a
minute of inactivity.
● Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
1. To switch from video mode to image mode, if necessary,
select
.
>
2. Press the capture key. Do not move the device before the
image is saved and the final image displayed.
Capture images with the secondary camera
1. Select
Options
Use back
>
2. To capture an image, select
before the image is saved and the final image displayed.
Camera
camera.
. Do not move the device
55
Advertisement
Table of Contents
