Related Manuals for Frigidaire CRA093PT10
Summary of Contents for Frigidaire CRA093PT10
- Page 1 FRIGIDAIRE Prod Normal Sound Installation II Www:frigidaireiCOm [-800_265_8352...
-
Page 2: Operation Of Current Device
This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may o ccur. Common sense and c aution must be practiced when insta,ing,... -
Page 3: Product Registration
Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Normal Sounds Sound of Rushing Air At the front of the unit, you may hear the sound of rushing air being moved by the fan. -
Page 4: Unit Description
Unit Description CONTROL PANEL ROOM AIR DISCHARGE AIR INTAKE CARRYING HANDLE (BOTH SIDES) DEHUMIDIFYING EXHAUST DRAIN OUTLET AIR OUTLET REMOTE CONTROL EXHAUST HOSE STORAGE DOOR (STORAGE WHEN EXHAUST NOT IN USE) REMOTE CONTROL ADAPTOR A BOTTOM TRAY DRAIN OUTLET Fig, 1 Accessories Included PARTS: PARTS... -
Page 5: Installation Instructions
Installation Instructions EXHAUSTING HOT AIR In the COOLING Mode the appliance must be placed close to a window or Takethe hoseout opening so that the warm exhaust air can be ducted outside. First position unit on a flat floor and make sure there's a minimum of 30.5cm clearance around the unit, and is within the vicinity of a single circuit outlet power source. - Page 6 Installation Instructions (continued) Installation in a double-hung sash window 1. Cut the foam seals(adhesive type) to the proper lengths and attach them to the window and stool. (Fig. 12) 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window.
-
Page 7: Air Conditioner
SWING BUTTON ON/OFF BUTTON • ® RESET + LOCK PIN BUTTONS FRIGIDAIRE Fig, 22 Battery Size: AAA Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel- cadmium) batteries. The RESETbutton is depressed when you want to return to the initial factory settings. The LOCKbutton is depressed to lock the keypad so the settings cannot be changed. -
Page 8: Heating Mode
Operating Instructions The following instructions represent the Control Panel, the same instructions can be used for the Remote Control. MODE: COOLING In thismode the exhaust adaptor hose MUST be used. 1.Press the MODE button until the "Cool" indicator lights. 2. Press the " V A" Temp buttons for desired setting. 3. -
Page 9: Remote Control Storage
Frigidaire Service Center. tempJtimer setting If the display reads "ES", the evaporator temperature sensor has failed. Contact your m°F Authorized Frigidaire Service Center. o€ temp/timer setting If the display reads "E4", the display panel communication has failed. Contact your m°F... -
Page 10: You Should
Operating Instructions (continued) ADDITIONAL THINGS Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. YOU SHOULD KNOW • The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. - Page 11 Room too cold. Set temperature too low. Increase set temperature. Room Too Hot. Set temperature too high. Lower setting. If These Solutions Fail, Call 1=800=265=8352 For Frigidaire Service, 02009 Electrolux Home Products, Inc, All rights reserved,...
- Page 12 Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.