Table of Contents
Advertisement
13.
To suspend your unit at the minimum
height, five double loop sections
of
chain are required (4-13/16").
Slip this
length of chain over the screw eye in
the joist, letting the excess chain hang
down in case adjustment
of length is
required
later.
14. Place "S" hook in bottom
link of chain
at four suspension
points.
15. Lift cabinet
up, with help and connect
"S" hooks to eye bolts at four points in
cabinet.
16. Connect
extension
springs to "S"
hooks. Push unit up and connect
upper loop of extension
spring to bot-
tom loop of fourth double loop of
Electrical Requirements
Your filter system
is wired for 120 volts
A.C. and is equipped
with a 3 conductor
cord and grounding
type plug approved
by
Underwriters
Laboratories
and Canadian
Standards
Association
Connect
unit to the nearest
120 volt AC
outlet and route cord so that it will not be
easily snagged
and pulled accidentally.
This plug requires
a mating 3 conductor
grounded
type outlet, properly
grounded.
If the outlet you are planning
to use for
this filter unit is of the two prong type DO
NOT REMOVE
OR ALTER
THE
GROUNDING
PRONG
IN ANY MAN-
NER. Have a qualified
electrician
replace
the 2-prong
outlet with a grounded
15
amp 3-prong
outlet.
WARNING:
Damaged
power cords
can cause shocks or fires.
If the
power cord is worn, cut or damaged
in any way, have it replaced
immedi-
ately.
WARNING:
To assure
product
SAFETY
and RELIABILITY,
repairs
and adjustment
should
be per-
formed
by Sears Service
Centers,
always
using Sears replacement
parts.
17.
chain. Repeat for other three springs.
Refer to figure shown on previous
page.
Unit is now hung from the ceiling
as
high as possible.
If you prefer the unit
to hang lower, unhooking
each of the
four chains from its screw hook (one
at a time), and rehooking
each chain
to its screw hook on a different
link
can do this. When the hanging
height
is satisfactory,
squeeze
all four "S"
hook loops closed at the eye bolts and
chains.
(Optional:
For a cleaner
appearance,
snip off extra length of
chain links.)
WARNING:
Electric
shock can kill.
Not all outlets
are properly
grounded.
If you are not sure that
your outlet is properly grounded,
have it checked
by a qualified
elec-
trician.
WARNING:
Electric
shock can kill.
To avoid shock,
never connect
plug
to power source outlet until all
assembly
steps are completed.
Unplug filter
unit before servicing
or
changing
any filters.
Properly
Grounded
Outlet
\
3-Prong
Plug
\
Grounding
Prong
7
- Quick Links:
- Repair Parts
Hide quick links:
Advertisement
Table of Contents
