Dell EqualLogic PS4100 Hardware Manual page 22

Equallogic ps series iscsi storage arrays with microsoft windows server failover clusters

Hide thumbs Also See for EqualLogic PS4100:

Table of Contents

Cabling The Dell EqualLogic PS6000/PS6100/PS6500 Storage Arrays

Connect a network cable from the network switch 0 to Ethernet 0 on the control module 1.

Connect a network cable from the network switch 0 to Ethernet 1 on the control module 1.

Connect a network cable from the network switch 1 to Ethernet 2 on the control module 1.

Connect a network cable from the network switch 1 to Ethernet 3 on the control module 1.

Connect a network cable from the network switch 1 to Ethernet 0 on the control module 0.

Connect a network cable from the network switch 1 to Ethernet 1 on the control module 0.

Connect a network cable from the network switch 0 to Ethernet 2 on the control module 0.

Connect a network cable from the network switch 0 to Ethernet 3 on the control module 0.

Repeat steps 1 to 8 to connect the additional Dell EqualLogic PS6000/PS6100/PS6500 storage array(s) to the iSCSI

switches.

NOTE: For PS6100 storage array, having all eight cables in steps 1 through 4 provides highest level of cable

redundancy. It works fine with only four cables. You can skip either step 1 or 5, either step 2 or 6, either step 3 or 7,

and either step 4 or 8.

For more information, see the figures below.

Figure 15. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS6000 Storage Array

1. cluster node 1

2. cluster node 2

3. switch 0

4. switch 1

5. Dell EqualLogic PS6000 storage system

6. control module 1

7. control module 0

Table of Contents

Show Quick Links

Table of Contents