Table of Contents
Advertisement
Installation from the Add Printer Wizard
Windows 95/Windows 98: See page 10 of the AR-PB2 Operation Manual.
Windows NT 4.0: See page 11 of the AR-PB2 Operation Manual.
Installing the resident font information (only Windows 95/Windows 98)
After installing the PS PPD driver, install the resident font information as described below.
NOTES
Be sure to install the printer driver before installing the resident fonts.
When installing the resident fonts, be sure to close all open applications.
If the printer is used in the network environment and 'Print to the following port' is changed in the properties setting of
the printer driver, reinstall the resident fonts.
1. Start Windows.
2. Insert the supplied PRINTER UTILITIES CD-ROM into a CD-ROM drive.
N
If your computer is configured for auto start, the license agreement will be displayed. Click the
'Cancel' button.
3. On the 'Start' menu, click 'Run'.
4. Enter the CD-ROM drive and "Packages\English\Psppd9x\Pfmsetup.exe". Then click the 'OK'
button.
Example: If the CD-ROM drive is designated as drive Q, type "Q:\Packages\English\Psppd9x\
Pfmsetup.exe" and click 'OK'.
5. Click the 'OK' button.
N
If the printer driver has not been installed, installation of the resident fonts will not be performed.
6. Click the 'OK' button.
7. After the resident fonts have been installed, restart Windows.
Making floppy disks from CD-ROM
The printer drivers and printer utilities in the CD-ROM can be copied to floppy disks. To install a
printer driver on a computer without a CD-ROM drive, the printer driver must be copied to a floppy
disk. The copying procedure on a Windows 95, Windows 98 or Windows NT 4.0 computer is shown
as follows.
6
Advertisement
Table of Contents
