Sharp MD-DR470H Operation Manual page 50
1-bit portable minidisc recorder
Hide thumbs
Also See for MD-DR470H:
- Operation manual (66 pages) ,
- Quick start manual (3 pages) ,
- Service manual (60 pages)
Table of Contents
Advertisement
Titling a MiniDisc (continued)
MD-DR470H
Master MiniDisc operation
1
Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target
one.
2
Whilst in the stop mode, press the MENU but-
ton.
The unit enters the menu select mode.
3
Select "EDIT" by pressing
the
or
button and
press the MENU button.
4
Select "NAME STAMP" by
pressing the
or
ton and press the MENU
button.
5
Press the MENU button.
6
When the unit displays
"CHANGE MD", remove the
master MiniDisc.
Remove it without turning off the power. Or, the oper-
ation will be cancelled.
50
MD-DR470H(E) TINSE0513AWZZ
Operation of the MiniDisc for stamping
7
Load a MiniDisc for stamp-
ing.
8
Press the MENU button.
The unit will finish recording the
character information and enter
the stop mode.
Note:
but-
If the total number of tracks on the
master MiniDisc does not match
that on the MiniDisc for stamping,
the unit will display "Can't STAMP"
and turn off the power.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
03/3/25
MD_DR470H_UK_6.fm
Advertisement
Table of Contents
Troubleshooting
