Table of Contents
Advertisement
Testing the Printer
Now that your printer is fully assembled, you can use its built-in self
test function to see that the printer is working correctly before you
connect it to a computer. You should perform this test to make sure
that your printer was not damaged during shipping and that the
ribbon is correctly installed.
Before running the self test, you need to connect the printer to an
electrical outlet and load a sheet of paper.
Plugging in the Printer
1. Make sure that the printer is turned off.
2. Plug the power cable into a properly grounded electrical outlet.
Running the Self Test
The self test can be run in the draft or Letter Quality mode,
depending on which button you hold down as you turn on the
printer.
Setting
the Printer
Up
1-15
Advertisement
Chapters
Table of Contents
