Table of Contents
Advertisement
Monitoring window layout
The icon patterns and their meanings are explained below.
Type: Displays the projector status.
No warnings or problems
Warning or problem
An error has occurred on the projector.
Notification
The projector requires immediate attention.
Monitoring disabled
The projector is not being monitored. If you right-click the icon and
select Monitoring enabled, the projector will be added to the
projectors that are being monitored.
Data being updated
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was registered,
or an incorrect Monitor Password was entered. s p.12, p.15,
Network error (TCP connection error)
Network error (ESC/VP.net communication error)
Group name: When projectors are registered to a group, the name of the
group that the projector belongs to is displayed.
Display name: Shows the display name.
Power: Shows the power on status for the projector.
Power on and normal status
Power off and normal status
Lamp Hours: Shows the lamp operating time for the projector.
Temperature level: The following five icons display the differing internal
temperature status of the projector.
*1
*2
*3
Power on and abnormal status
Power off and abnormal status
Internal temperature
normal
Internal temperature
normal
High-temperature
warning
Error information: Shows a notification or warning/problem status using
the following icons.
Clean Air Filter Notice
Replace Lamp
High-temperature warning
Replace Air Filter
p.17
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Low air flow error
Air filter air flow sensor error
Other error
High-temperature
warning
Internal temperature error
Lamp Cover Open
*4
Lamp Error
Lamp failure at power on
High internal temperature error
Internal Error
Fan error
Sensor error
Supply System Error (Ballast)
Auto Iris Error
24
Advertisement
Table of Contents
