Advertisement
ATTACHING
YOUR
BENCH-TOP
TOOL TO THE STAND
(Fig.12)
WARNING:
Failure to
unplug the tool before attach-
Fig. 12
ing it to the stand could result in
Mounting
Holes
accidental starting and possibly
serious personal injury.
_,
WARNING:
To avoid
serious personal
injury, always
make sure that bench tools
are fully supported
and se-
curely attached
to a level work
surface.
If necessary,
move
the stand to a location
where
it will be more stable.
_,
WARNING:
Always check
that all mounting
bolts and nuts used to secure a tool to the stand are tightened
before moving the stand or using the tool. Failure to do so could result in serious
personal injury.
To attach tool
1.
Before mounting
your bench top tool, make sure the Caster Wheels are in the
"DOWN"
or locked position.
2. Check the bench top tool for the necessary
number of holes and their
locations
for mounting the tool. This information
should be in the manual for
the bench top tool.
3. Choose
the corresponding
mounting
hole locations
on the tabletop
assembly
of the adjustable
work stand (Fig. 12).
4. Change the width of the tabletop
assembly as necessary
to accommodate
the
bench-top
tool. To change the width of the tabletop
assembly, see steps 6-8 in
Unfolding and Setting Up the Work Stand.
5.
Place the bench-top
tool on the tabletop
assembly, align the mounting
holes
in the bench-top
tool with the holes on the tabletop
assembly,
and use the
bolts recommended
in your bench-top
tool's manual to connect them.
22335
Manual
Revised 07-1203
Page 16
Advertisement
