Engine Controller Mode - Brother HL-2600CN Service Manual
Color laser printer
Hide thumbs
Also See for HL-2600CN:
- User manual (225 pages) ,
- Owner's manual (118 pages) ,
- Parts reference list (27 pages)
Table of Contents
Advertisement
2.2
Engine Controller Mode
The Ready LED is lit, and applicable messages appear on the liquid crystal display (LCD)
in the following cases;
1) Consumables require to be replenished.
2) Waste toner pack is full of waste toner.
3) Paper jam.
4) Periodic maintenance.
5) Maintenance work being incomplete.
The above cases are not regarded as a breakdown, and should be treated in accordance
with Table 8-2;
Display Message
Table 8-2
Meaning
No paper in the upper
cassette / lower
cassette
Inconsistency of
media
No upper / lower
media cassette
Toner (Y, M, C, K)
empty
Waste toner pack full
of toner
Change the oil bottle
Change the fuser
cleaner
Misprinting occurred
Toner cartridge not
installed
Fusing unit not
installed
OPC belt cartridge not
installed
Paper jam at feeding
area
Paper jam inside
printer
Countermeasure
Replenish paper.
Change media.
Install cassette(s).
Replace with new toner
cartridge(s).
Replace with a new waste
toner pack.
Replace with a new oil bottle.
Replace with a new fuser
cleaner
Confirm status of media
cassette.
Confirm correct paper size.
Confirm consistency of
media.
Confirm the installation of the
toner cartridge(s).
Remove the fusing unit and
refit it. Confirm it is correctly
installed.
Confirm the installation of the
OPC belt cartridge.
Remove the media cassette,
and remove paper jammed at
feeding entrance.
Open the transfer unit 2, and
remove paper jammed inside.
Advertisement
Chapters
Table of Contents
Troubleshooting
