Page 1
OWNER’S MANUAL HL40XSL2/HL40XSLW2/ HL46XSL2/HL46XSLW2 LED HDTV Please READ this manual carefully before operating your TV, and retain it for future reference. 0090509595...
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LED HDTV...
Energy Star compliant By being Energy Star compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
Select the desired program ..........15 Select the desired sound..........15 Mute..................15 Video menu ............15 How to select picture mode........... 15 How to customize your own picture status....16 PC Set..................17 Audio menu............17 How to select audio mode..........17 Haier LED HDTV EN-4...
5 POWER Press to turn on and off the TV. Receivers IR signals from the remote control. 6 Remote Sensor Do not put anything near the sensor, which may block the remote control signal. 7 Power indicator EN-5 Haier LED HDTV...
Headphone audio output terminal. jack Connect a HDMI device to receive digital audio HDMI In and uncompressed digital video. Connect a USB flash drive to view MPEG2 videos, C USB input JPEG images or listen to MP3 songs. Haier LED HDTV EN-6...
Press again to return to the program. Q CH.LIST Open the channel list in TV. R FAV.LIST Press to open the favorite channel list in TV. S ARC(Aspect Ratio Control) Press to change the aspect ratio. EN-7 Haier LED HDTV...
If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a professional in your area. Note All cables shown are not included with the TV. Haier LED HDTV EN-8...
VCR. (Refer to the VCR owner’s manual.) in the figure. Select the input source with using the INPUT button on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LED HDTV...
Audio IN port for audio connections, depending on How to use your computer connector. Turn on the digital set-top box. (Refer to the owner’s If the graphic card on the computer does not manual for the digital set-top box.) Haier LED HDTV EN-10...
If the source device has an analog audio output The synchronization input form for Horizontal and connector, connect the source device audio output to Vertical frequencies is separate. DVI Audio In port located on the left side of HDMI port. EN-11 Haier LED HDTV...
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. Note Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. Haier LED HDTV EN-12...
/ ENTER button and then use button Press / ENTER button to select Tuner. to select Language. Press button to select language. Press button to select Cable or Antenna ( English, Spanish or French) mode. Press button to select Channel Scan. EN-13 Haier LED HDTV...
/ ENTER button and then use button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LED HDTV EN-14...
Press CH+ button to select a channel number in The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . Press CH- button to select a channel number in Press MENU button and then use button to EN-15 Haier LED HDTV...
Channel Tint Function Allows you to select the color mix (Tint) of the picture. Lock Sharpness Select EXIT Back This will adjust the sharpness of fine details in the MJC Demo picture. Note Haier LED HDTV EN-16...
H Position V Position Press / ENTER button and then use button Audio Phase to adjust the setting. Clock Function Lock Balance Adjust to emphasize left or right speaker balance. Bass ENTER Adjust Select EXIT Back EN-17 Haier LED HDTV...
Each time you press SAP button, Mono, Stereo or SAP appear. If other languages are available on the button to select OSD transparency. digital signal, select them with the SAP button. Press button to select Low, Middle or High. Haier LED HDTV EN-18...
Digital Closed Caption Digital Caption Style Audio Time Setup Select EXIT Back Channel Function Date/Time: Press VOL+/ ENTER button to enter the Lock submenu. Closed Caption Select EXIT Back Press button to select Analog Caption VOL+/- EN-19 Haier LED HDTV...
(Children 7 years older) Font Color: To adjust the font color: White, Green, TV-G (General audience) Blue, Red, Cyan, Yellow, Magenta and Black. Font Opacity: To adjust the font opacity: Solid, TV-PG (Parental guidance suggested) Translucent and Transparent. Haier LED HDTV EN-20...
L (Language - (applies to TV-PG, TV-14, TV-MA) select Lock menu. adult language) S (Sex - sexual Press / ENTER button and then use button (applies to TV-PG, TV-14, TV-MA) situations) to select Channel Block. EN-21 Haier LED HDTV...
Page 23
“TV-Y” category, then all the categories in the “young adult” group will be blocked (TV-Y, Press / ENTER button and then use TV-Y7, TV-G, TV-PG, TV-14 and TV-MA). button to select the rating. Haier LED HDTV EN-22...
(if information is Cancel available from the station). Press VOL+/- button to select OK or Cancel then OK to Note confirm. If OK, the parameter will return to the factory set. EN-23 Haier LED HDTV...
Service. The other service subchannels are not pre- assigned. It is up to the discretion of the individual Closed Captions caption provider to utilize the remaining service channels. Closed captioning is a process which converts the Note Haier LED HDTV EN-24...
Plug-in an external storage device into USB port. Short/Medium/Long Information Press USB button on the remote to display Press MENU button to display the option list. multimedia. Press ENTER button on the remote to display the sub page. EN-25 Haier LED HDTV...
Press button to select folder or file, and then press ENTER button to enter the play interface. Press MENU button, and the press to select Media Type , Press ENTER and press to select Haier LED HDTV EN-26...
2. Repeat Screen Mode no data, then LED will not blink. 3. Show Info Default init status: TV/Haier codeset. Press the button on the remote control to select the adjusted item, press ENTER button to confirm. Manually Programming the Control 1.
Page 29
3, so then led will blink three times and remains OFF. After searching the entire data base, this mode will be Blink Freq is 1 HZ. automatically exited and led will blink for 3 times in Haier LED HDTV EN-28...
3 seconds, the LED will blink 3 times and turn off, Durabrand 053 097 137 341 335 338 Dwin 322 334 default Haier codeset (001) will be programmed to the Electroband control. Electrograph Electrohome 058 059 060 062...
Please be sure not to use a wet cloth. yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Extended Absence EN-35 Haier LED HDTV...
Page 20 for adjustments. Warranty Verify if correct channel is selected. No picture This Haier brand product, when shipped in its original Adjust the antenna. in some container, will be free from defective workmanship and Make adjustments by Fine Tune and...
Page 38
Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.