Table of Contents
Advertisement
Product Overview
This chapter explains the product overview.
Features
The UB‐R03 is installed in the TM‐series printers as an interface board to provide Wireless
Ethernet communications.
Wireless LAN
• IEEE802.11b compatible
• An infrastructure mode and an Ad‐Hoc mode are supported.
• Equipped with WPA/WPA2‐PSK, 64/128bit WEP
• Please prepare the access point (for the Infrastructure mode) or the computer for the wireless
LAN (for Ad‐Hoc mode) for your system.
Network Function
• IPv4 capable. Not IPv6 capable.
• Supports DHCP/APIPA.
• SNMP capable. The status of the printer can be acquired by using SNMP.
Setting
• The setting from the computer for wireless LAN is possible the same as the wireless LAN
interface (UB‐R02) as usual.
• The UB‐R03 has the USB connector only for the network parameter setting. The network
parameter can be set through the USB connector. It is used only for the parameter setting, so it
cannot be used for printing or other uses.
• You can check and set the parameter by using a Web browser.
• The setting utility TMNetWinConfig V3 is available. Please download it from the EPSON Web
site and use it.
• Exclusive utility software (TMNetWinConfig V3) is needed to set through the USB
connector.
• The USB connector can be used only for setting the network parameter. The USB
connector cannot be used for other purposes, such as printing.
Chapter 1 Product Overview
17
1
Hide quick links:
Advertisement
Table of Contents
