• Before operating your new oven make sure you
read and understand this Use and Care Guide
completely.
• Before the Over the Range Microwave Oven can
be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display
will show ENJOY YOUR OVEN PRESS CLEAR
AND PRESS CLOCK.
2. Touch the STOP/clear pad.
3. Set clock. See below.
To set the clock
• Suppose you want to enter the correct time of
day 12:30 (A.M or P.M.).
Procedure
Step
1. Touch timer/clock and
number 2.
2. Enter the correct time
of day by touching the
numbers in sequence.
3. Touch timer/clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the STOP/clear pad and re-set the
clock.
• If the electrical power supply to your microwave
oven should be interrupted, the display will
intermittently show after the power is reinstated.
If this occurs during cooking, the program will
be erased. The time of day will also be erased.
will appear.
:
Simply touch STOP/clear pad and reset the clock
for the correct time of day.
Your Over the Range Microwave Oven can
be programmed with the door open except for
START/add a minute and popcorn.
Press
Stop/clear
timer/
2
clock
Touch the STOP/clear to:
1. Erase if you make a mistake during programming.
1
2
2. Cancel timer.
3. Stop the oven temporarily during cooking.
3
0
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
timer/
clock
Before Operating
NOTE
13
E