Use Safecom Go Samsung - A4 Models; Register Card With Windows Credentials; Register Card With Puk Code - Samsung CLX-9250ND Administrator's Manual
Administration guide
Hide thumbs
Also See for CLX-9250ND:
- Installation manual (69 pages) ,
- Brochure & specs (8 pages) ,
- Service manual (550 pages)
Table of Contents
Advertisement
4 Use SafeCom Go Samsung - A4 models
4
Use SafeCom Go Samsung - A4
models
Note: If there is an available PUK code in the SafeCom system, the SafeCom
Card Registration page first prompts the user to register their card using a PUK
code. Follow the steps below to register the card by the method of your
choice.
4.1
Register card with Windows credentials
1.
Use the card at the device's card reader and tap OK.
2.
If prompted for a PUK code, tap Cancel and a prompt for Windows
credentials opens.
3.
Tap the Username field and enter the user name using the keypad or
touch screen.
4.
Tap OK.
5.
Tap the Password field and enter the password.
6.
Tap the Domain field and enter the domain. The solution can be
configured to NOT prompt for the domain (2.7.6).
7.
Tap OK and then OK. Or to abort card registration tap Cancel.
The card is registered and you are logged in.
4.2
Register card with PUK code
Register card by entering an 8-digit PUK code. If SafeCom detects that there is
a PUK code in the system, the user is asked to enter a PUK code. The PUK code
is supplied to the user in advance, typically via e-mail.
1.
Use the card at the device's card reader and tap OK.
2.
Tap the PUK code field and enter the PUK code using the keypad or touch
screen.
3.
If prompted for a PIN code, tap the PIN code field and enter the PIN
code.
4.
Tap OK.
The card is now registered and you are logged in.
D60719-07
37
Hide quick links:
Advertisement
Table of Contents
