Related Manuals for Epson J2100 - TM Color Inkjet Printer
Summary of Contents for Epson J2100 - TM Color Inkjet Printer
- Page 1 TM-J2000/J2100 User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 401303603...
-
Page 2: Part Names
Part Names cutter cover emergency cutter control panel ink cartridge cover paper roll cover power supply switch DIP Switch Tables Serial transmission speed Serial Transmission speed SW Function 9600 bps 1-1 Power button function Disabled Enabled 19200 bps 1-2 Interface condition by the DIP by the selection... -
Page 3: Emc And Safety Standards Applied
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance... -
Page 4: Safety Precautions
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous. -
Page 5: Warning Label
For customers in North America, go to the following web site: http://www.epsonexpert.com/ and follow the on-screen instructions. For customers in other countries, go to the following web site: http://www.epson-pos.com/ Select the product name from the “Select any product” pulldown menu. TM-J2000/J2100 User’s Manual 3... -
Page 6: The Control Panel
English The Control Panel TM-J2000 TM-J2100 LEDs POWER LED Lights when the power is on and is off when the power is off; flashes during cleaning and other operations. Note: Never turn off the printer when the POWER LED is flashing. ERROR LED Off when the printer is online, lights when the printer is offline, and flashes when an error occurs. -
Page 7: Power Switch And Power Switch Cover
English Power Switch and Power Switch Cover The power switch is on the front of the printer. Press it to turn on the printer, and press and hold it for more than 3 seconds to turn off the printer. Note: Never turn off the printer when the POWER LED is flashing. - Page 8 English 2. Carefully lift where LIFT is marked on the paper roll cover, and pull the paper roll cover toward you. 3. Remove the used paper roll core if there is one. 4. Put the paper roll inside the printer in the correct direction, as shown in the illustrations below.
-
Page 9: Installing Or Replacing An Ink Cartridge
English 6. If you close the cover correctly, you will feel it fit into place, and the printer will automatically feed approximately 7 cm {2.76 in.} of roll paper. approximately 7 cm {2.76 in.} 7. The roll paper is cut automatically. Note: Do not touch the paper roll cover during printing, paper feed, or cleaning. - Page 10 English Note: Use Seiko Epson specified ink cartridges. Performance of the printer when other ink cartridges are used is not guaranteed. Follow these steps to install an ink cartridge for the first time or to replace an empty ink cartridge.
- Page 11 English 7. Push the cartridge lever back to its original position. You will feel the cartridge fit into place. Note: The INK OUT LED will now be off. 8. Close the ink cartridge cover. The POWER LED flashes for approximately 1 minute as the ink delivery system is charged.
-
Page 12: Disposal Of Used Cartridges
English Disposal of Used Cartridges Dispose of used ink cartridges as industrial waste products. Obey the laws and regulations of your country and district. Ink Cartridge Life To make your ink cartridges last as long as possible, follow these simple rules: ❏... -
Page 13: Cleaning The Print Head
English Cleaning the Print Head If printing becomes faint or uneven and the INK OUT LED is not on or flashing, press the CLEANING button until the printer mechanism begins to clean the print head (more than 3 seconds). When the cleaning stops, the printer is ready for normal printing. Transporting To transport this printer, follow these steps: 1. - Page 14 English TM-J2000/J2100 Specifications Print Method Serial Ink Jet Dot Matrix Method Normal, High speed, Economy: 180 × 180 dpi Resolution Bar Code: 360 × 360 dpi Font A: 12 × 24 Fonts (Includes Horizontal Font B: 9 × 17 2 Dot Spaces) Print Width 50.8 / 61 / 67.7 / 72.2 mm {2.0 / 2.4 / 2.7 / 2.8"} Character Size: (W ×...