Message Waiting - Panasonic KX-TDE100 Operating Manual
Pure ip-pbx
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (470 pages)
Table of Contents
Advertisement
•
For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
1.3.42 Message Waiting
For a caller
When the called extension is busy or does not answer your call, you can
leave a notification so that the called party may call you back.
For a called extension
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call back the caller by a simple operation.
Note
This feature is not available for SIP extensions (except the
KX-HGT100). For KX-HGT100 users, refer to the Quick Reference
Guide of the KX-HGT100 for instructions.
For a caller
To leave a message waiting indication
PT/SLT/PS
When the called extension is busy or does not answer
MESSAGE
OR
4
Press MESSAGE
or enter 4.
To leave/cancel a message waiting indication
PT/SLT/PS
PT and SLT
Off-hook.
•
When making a call to SIP Extensions, you cannot leave a message waiting notification. If you
perform the operation to leave a message waiting notification to a SIP Extension, you will hear
a reorder tone.
For a called extension
Document Version 2008-10
C.Tone
On-hook.
1
7
0
OR
0
Enter
70.
Enter 1 to leave
or 0 to cancel.
Leave
desired
extension no.
Cancel
Enter desired
extension number.
1.3.42 Message Waiting
C.Tone
On-hook.
Operating Manual
99
Advertisement
Table of Contents
