MT883 .........................7 3.2 Accessing the Network Through the PPP Dial-Up Software on the Computer ..........................8 4 Configuring the MT883 ................9 4.1 Changing the Administrator Password Used for Logging In to the Web Configuration Page ....................9 4.2 Changing the IP Address................9 4.3 Restoring Default Settings................10...
1 Safety Precautions Thank you for purchasing SmartAX MT883 ADSL CPE (hereinafter referred to as the MT883). For safety purposes, carefully read through these safety precautions and observe them during operation. Basic Requirements Keep the device dry during storage, transportation, and operation of the device.
Operation Requirements Do not allow children to play with the device or accessories.Swallowing the accessories may be fatal. Use the accessories provided or authorized only by the manufacturer. Make sure that the device does not get wet. If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device.
Page 8
After the MT883 is used for a certain period of time, the cover will be heated, which will not affect the function of the MT883.
2 Connecting the Cables and Getting Started 2.1 Simple Connection If your telephone line is used for the broadband network access only and you do not need to use a telephone, take the following figure as a reference for connecting the cables.
2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. POWER # # # # # # # # # # # # RESET ADSL...
Later, the ADSL indicator becomes on. The POWER indicator is also on, indicating that the MT883 is working. To power off the MT883, press the power button on the top of the MT883, and then remove the USB cable from the computer.
3.1 Accessing the Network Through the Embedded PPP Dial-Up Software of the MT883 If you select this method for accessing the network, the MT883 starts to set up dial-up connection automatically after the startup. You can access the network after you power on the computer.
For details, refer to the procedure for enabling the embedded dial-up function described in Step 2 in section 3.1 "Accessing the Network Through the Embedded PPP Dial-Up Software of the MT883." Select Bridge from the Mode drop-down combo box. Step 2 Install and configure the PPP dial-up software on the computer.
OK. If you cannot remember the user name and password that have been changed, you can restore the default settings of the MT883 by pressing the RESET button on the panel. In this way, the user name and the password used for logging in to the Web configuration page are restored to default values.
IP address of the MT883 so that the computer can access the Web configuration page. 4.3 Restoring Default Settings To restore default settings, log in to the Web configuration page, and then do as follows: Step 1 Choose Tools > Reboot in the navigation tree to display the reboot page.
Page 16
3. Remove and then insert the network cable or replace the netwo rk cable. If the LAN indicator is still off, contact an authorized maintenance center. Step 4 Check whether the driver for the network adapter is properly installed. Take a computer that runs Windows XP as an exam ple.
Page 17
Step 8 Try to access multipl e Web sites to check whether the terminal can access other Web sites. the terminal still cannot access other Web sites, contact your network operator. What can I do if Web pages often cannot be displayed during Web page browsing and can be d splayed after the terminal is restarted? Step 1 Ensure that the terminal and other devices such as telephones or f...
Therefore, use this function with caution. ADSL It is used to connect to the MODEM interface on the splitter. It is the power button on top of the MT883 and is used to power on or power off the MT883.
G.992.5 Maximum downstream rate:24 Mbit/s (ADSL2+) Maximum upstream rate: 1024 kbit/s The power supply is provided through the Power supply for the MT883 USB port on the computer. Power consumption < 3 W Ambient temperature for operation 0°C to 40°C...
Page 20
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com Part Number: 103127...