Selecting print media
Selecting the appropriate print media for your printer helps you avoid printing problems. The following sections
contain guidelines for choosing the correct print media for your printer.
Paper
•
Transparencies
•
Envelopes
•
Labels
•
Card stock
•
Paper
For the best print quality, use 75 g/m
considering using with the printer before buying large quantities.
When loading paper, note the recommended print side on the paper package, and load paper accordingly.
Paper characteristics
The following paper characteristics affect print quality and reliability. We recommend that you follow these
guidelines when evaluating new paper stock.
For detailed information, refer to the Card Stock & Label Guide located on the Dell Web site at www.dell.com.
The laser printing process heats paper to high temperatures of 225°C (437°F) for Magnetic Ink Character
Recognition (MICR) applications, and 205°C (401°F) for non-MICR applications. Use only paper able to
withstand these temperatures without discoloring, bleeding, or releasing hazardous emissions.
Check with the manufacturer or vendor to determine whether the paper you have chosen is acceptable for
laser printers.
Weight
The printer can automatically feed paper weights from 60 to 176 g/m
integrated and optional 500–sheet trays and paper weights from 60 to 135 g/m
the multipurpose feeder and optional 250–sheet trays. Paper lighter than 60 g/m
enough to feed properly, causing jams. For best performance, use 75 g/m
using paper narrower than 182 x 257 mm (7.2 x 10.1 in.), make sure the weight is greater than or equal to 90 g/
2
m
(24 lb bond).
Unacceptable paper
The following papers are not recommended for use with the printer:
Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,
•
carbonless copy paper (CCP), or no carbon required (NCR) paper
Preprinted papers with chemicals that may contaminate the printer
•
Preprinted papers that can be affected by the temperature in the printer fuser
•
Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in.,
•
such as optical character recognition (OCR) forms
In some cases, you can adjust registration with your software application to successfully print on these
•
forms.
Coated papers (erasable bond), synthetic papers, thermal papers
•
Rough-edged, rough or heavily textured surface papers or curled papers
•
Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309
•
Recycled paper having a weight less than 60 g/m
•
Multiple-part forms or documents
•
Service Manual
1-16
2
(20 lb) xerographic, grain long paper. Try a sample of any paper you are
2
(16 lb)
2
(16 to 47 lb bond) grain long in the
2
(16 to 36 lb bond) grain long in
2
(16 lb) might not be stiff
2
(20 lb bond) grain long paper. When