5 Installing Additional Memory
Introduction
This chapter describes how to add memory to the HP NetServer LH 6000r or the
HP NetServer LH 6000. The standard configuration ships with 256 MB of
interleaved memory, one 128 MB DIMM in slot 1A and one 128 MB DIMM in
slot 1B. Expansion is accomplished by adding pairs of equal size DIMMs in
stipulated slots up to the maximum configuration of 8 GB.
1A
*1
2A
*2
3A
*3
4A
*4
DIMM
Slots
1B
*5
*6
2B
3B
*7
4B
*8
*=Event Log
DIMM numbers
Memory Guidelines
l
Add paired DIMMs of these sizes:
128 MB
256 MB
512 MB
1 GB
l
Memory of equal size must be added in pairs.
l
You can mix DIMM sizes. For example, you may place a 1 GB DIMM
pair next to a 128 MB DIMM pair.
l
Add memory in pairs and in any order to the three remaining slot pairs.
l
Maximum configuration is 8 GB.
l
Do not rock the DIMM into place, but apply firm and even pressure until it
is seated in the slot.
l
Use only HP-supported DIMMs.
S1
Figure 5-1. DIMM slots on System Board
53