Using The Netware Tape Backup; Using A Cd-Rom With Netware - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual
Hp server ultra3 scsi host bus adapter
Hide thumbs
Also See for Tc2110 - Server - 128 MB RAM:
- Maintenance manual (118 pages) ,
- Installation manual (65 pages) ,
- Information manual (20 pages)
Table of Contents
Advertisement
Chapter 5
Before you eject your current media, you should first Dismount it (menu choice 5).
When the media status is Dismounted, you can eject the media. However, NetWare
does not allow you to dismount it if the media is locked.
To insert your new media, wait for the drive to spin-up, and then select the Drive
Mount option.
Lock Status
If your removable-media device supports the Lock/Unlock feature, you can lock the
media (menu choice 6). The media must be in the Not Locked state before you can
eject it. If the media is Locked, it cannot be ejected when you press the Eject button.
Using the NetWare Tape Backup
Included with Novell NetWare is a server-based tape backup utility called
sbackup.nlm. This utility allows you to backup server disk drives to a server tape
drive. The utility supports HP host adapters.
Novell NetWare documentation contains instructions for loading the server backup
software. Refer to the NetWare Server Backup Manual to load the tapedai, tsa, and
sbackup modules.
1. Once you have loaded adpt160m.ham, load tsaxxx.nlm (tsa312.nlm, tsa400.nlm,
tsa410.nlm) and sbackup with these options:
:load scsi2tp.cdm
:load tsaxxx
:load sbackup
The appropriate driver that interfaces sbackup to ASPI is loaded automatically.
2. When sbackup is loaded, it asks for a login name. Enter the appropriate name.
3. If sbackup asks you to select the device driver, select the HP DIBI-2 Tape
Driver, regardless of the type of SCSI tape drive being attached (e.g., even if the
tape drive is manufactured by Wangtek, do not select the Wangtek driver).
Novell publishes a list of SCSI tape drives supported by sbackup.nlm.
Using a CD-ROM with NetWare
To use a CD-ROM with NetWare, follow these instructions:
1. Load <File Name>adpt160m.ham by entering the following line:
:load [pathname]adpt160m
52
Novell NetWare Installation
Advertisement
Table of Contents
Troubleshooting
