Table of Contents
Advertisement
To ensure safe and secure installation, please
observe the instructions below.
WARNING!
Incorrect
Installation
can cause serious
accidents.
The weight of the dryer and the height of
installation
makes the stacking
procedure
too risky for one person. This procedure
should
be performed
by 2 or more
experienced
service
personnel.
Stackin9kit
Place washer
firmly on a stable,
even and
solid floor.
Peel protective
paper off the tape from the
stacking
kit side bracket.
Secure stacking
kit side bracket
to the
washer
with a screw on the back of bracket.
Repeat Steps 2, 3, 4 for the other side.
Place the dryer on top of the washer by fitting
legs as shown in the picture.
Avoid finger
injuries - be careful
not to pinch fingers
between
the washer
and dryer. Slide dryer
slowly
backwards
to the stopper of kit.
Fit the stacking
kit side bracket
firmly to the
side of top plate by attaching
the double-
sided tape to top plate as picture shows.
Insert the front stacking
kit. Push the front
stacking
kit back to the stoppers
of side
stackingk_
_
//
Screw both sides of the front kit.
If there are some foreign objects on the surface
of top plate, it becomes difficult to apply double,
sided tape on.
• Do not use stacking
kit with a gas dryer in
potentially
unstable
conditions
like a mobile
home.
Advertisement
Table of Contents
