Advertisement
Important
: Grounding through the neutral conductor
is prohibited tbr (1) new branch-circuit
installations,
(2) mobile homes, and (3) recreational
vehicles, and
(4) areas where local codes prohibit grounding through
the neutral conductor.
Prepare minimum
5ft( 1.52m) of length in order for
dryer to be replaced.
First, strip 3 _/2inches (8.9cm) of outer sheath from
end and strip 1 inch of insulation
from each
conductor.
,¢
Then, put the hooked shape end of the wire under
the screw of the terminal block(hooked
end facing
rightward)
and pinch the hook together
and screw
tightly.
1. Connect neutral wire(white)
of power cord to
center terminal block screw.
2. Connect red and black wire to the left and right
terminal block screws.
3. Make sure that the strain relief screw is tightened
and be sure that all terminal block nuts are on
tight and power cord is in right position.
Ce est wmln er)
__
Neutral grounding
_2_ I_]:_ _
wiretwhite)
,_o_
__,!
Neutral grounding
_"_-
__
_
wire(white)
._ _'
_L__
Strain relief
_"
_\
I/_r-
External ground
connector
• If your local codes or ordinances
do not allow the
use of a 3 wire connection,
or you are installing
your dryer in a mobile home, you must use a 4-
wire connection.
{ 4-wire receptacle
NEMA type 14-30R)
plua
_
S Ptadet_rgic_s his
_4-pront
with
_NeutrN
Prong
nt plug
_
3/4 in. (1.9 cm)
pproved
strain
relief
_L
NeeuGt [ 21Updo p rg n g
Ring terminals
Center terminal block
screw(siNer)
--
Neutral grounding
wire(white)
Neutral wire
(white or center wire)
Strain relief
Green wire of power cord
External ground connector
1. Connect neutral wire(white)
of power cord to
center terminal block screw.
2. Connect red and black wire to the left and right
terminal block screws.
3. Connect ground wire(green)
of power cord to
external ground screw and move neutral ground
wire of appliance
and connect it to center screw.
4. Make sure that the strain relief screw is tightened.
and be sure that all terminal block nuts are on
tight and power cord is in right position.
17
Advertisement
