This section covers:
•
Inserting a Disc
•
Removing a Disc
•
Manually Ejecting
a Disc
To load a disc into the disc drive, complete the following steps:
1. Press the Eject button located on the front of the drive.
2. Remove a disc from its protective case, holding the disc by its
center hole and outer edge to avoid touching the surface.
3. Place the disc, label side up (unless it is a double-sided
DVD), into the round area of the tray. Gently press the disc
down onto the center spindle of the tray until the disc snaps
into place.
4. Push the tray back into the drive until the drive locks
into place.