Install The Access Point - D-Link DWL-6600AP Quick Installation Manual
Unified concurrent dual-band access point
Hide thumbs
Also See for DWL-6600AP:
- Cli command reference (46 pages) ,
- Quick installation manual (24 pages) ,
- Specifications (4 pages)
Advertisement
Install the access point:
Follow these step-by-step instructions to
install the DWL-6600AP on a wall or ceiling:
Step 1: Place the mounting ring on the
ceiling and position it so that the arrow
symbol (triangle) points in the direction that
the product's front side should face. Mark
the positions of the four anchor holes with a
pencil. Drill the holes where the marks have
been made. The holes should be at least as
deep as the supplied screw anchor plugs.
Step 2: Insert the provided screw anchor
plugs into the holes.
Step 3: Use the provided screws to attach
the mounting ring to the wall.
Step 4: Place the DWL-6600AP's male
brackets in the mounting ring's female
brackets, with the device's LED lights facing
the desired direction. Rotate the product
clockwise to lock it in position.
Congratulations, you have just successfully
mounted DWL-6600AP product.
6
D-Link DWL-6600AP Quick Install Guide
- Quick Links:
- System Requirements
- Leds
- Interfaces
Hide quick links:
Advertisement
