Table of Contents
Advertisement
Troubleshooting
The phone does not
work at all.
Check if the phone is correctly
installed. (Refer to page 9)
Is the power correctly connected to
appropriate voltage.
(Refer to page 9)
Check if the battery is correctly
inserted to the remote set.
(Refer to page 11)
Check if the battery is adequately
charged. (Refer to page 11)
Check if the power is on.
(Refer to page 12)
The remote set does
not charge.
Check if the charging connector
is clean.
If the charging connector is not clean,
use a cotton cloth or an eraser to
wipe it. (Refer to page 45)
Check if the power voltage is
appropriate. (Refer to page 9)
If you have cleaned the charging
connector but it still does not work,
then please contact your local service
center and purchase new battery.
(Refer to page 11)
43
The remote set does
not ring.
Check if the battery is correctly
inserted. (Refer to page 11)
Check if the battery is adequately
charged. (Refer to page 11)
Check if the power of the remote
set is on. (Refer to page 11)
Check if the remote set is
registered to the base set.
(Refer to page 39)
I hear many noises while
using a remote set.
Press the
button to reduce the
noise. (Refer to page 37)
Check if the distance is not too far
from the base set.
(Refer to page 37)
Make stand the antenna of the base set.
Try installing the base set at a different
location.
I hear warning beep
tone in remote set.
Check if you are not too far away
from the base set. If yes, move
closer toward the base set.
(Refer to page 37)
If you see
mark on the
screen, hang up the phone and
adequately charge your phone.
(Refer to page 38)
44
Advertisement
Table of Contents
