Advertisement
2.
©1999 Motorola, Inc.
Getting Started
Attaching the Data Cable
Before you install the fax/modem software on your computer, it is
a good idea to attach the cable to your computer and phone.
1. Plug the smaller end of the cable into the accessory
1.
connector on your phone, as shown at left.
2. The other end of the cable is a 9-pin plug (a PC RS232 plug).
Find the matching serial port on the back of your computer,
insert the 9-pin plug, and tighten the screws by hand.
To indicate the cable is attached on both ends, your phone
will beep once.
Keep in mind: To save power, some laptops deactivate unused
serial ports. If this happens, open an application that uses the
serial port, like a fax or dial-up application, and your computer will
automatically activate the port.
Installing the Software
To begin making wireless data calls, you will need to
install the software from the CD-ROM that came in the Data
Connectivity Kit. Included on the disk is the CDMA modem driver
for your computer.
Previous
Menu
Next
4
Advertisement
