Captive Portal Commands; Authentication Timeout; Enable - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

Captive Portal Commands

The Captive Portal feature is a software implementation that blocks both

wired and wireless clients from accessing the network until user verification

has been established. Verification can be configured to allow access for both

guest and authenticated users. Authenticated users must be validated against

a database of authorized Captive Portal users before access is granted.

The Authentication server supports both HTTP and HTTPS web

connections. In addition, Captive Portal can be configured to use an optional

HTTP port (in support of HTTP Proxy networks) or an optional HTTPS port.

If configured, this additional port or ports are then used exclusively by

Captive Portal.

NOTE: This optional HTTP port is in addition to the standard HTTP port 80 which is

currently being used for all other web traffic, and the optional HTTPS port is in

addition to the standard HTTPS port 443 used for secure web traffic.

Commands in this Chapter

This chapter explains the following commands:

Captive Portal Global Commands

captive-portal

Captive Portal Configuration Commands

configuration

show captive-portal

show captive-portal status

name (Captive Portal)

redirect-url

Captive Portal Commands

Show Quick Links

Table of Contents