Installation; Remote Console Switch Quick Setup Checklist - Dell PowerEdge KVM 1081AD User Manual
Remote console switch
Hide thumbs
Also See for PowerEdge KVM 1081AD:
- User manual (106 pages) ,
- Hardware user's manual (86 pages) ,
- Installer/user manual (60 pages)
Table of Contents
Advertisement
Installation
The Remote Console Switch system includes the Remote Console Switch,
the Remote Console Switch Software, and the on-board web interface. You
may choose to use either the Remote Console Switch Software or the on-
board web interface to manage your system. The on-board web interface
manages a single Remote Console Switch and its connections, while the
Remote Console Switch Software can manage multiple switches and their
connections.
If you plan to use the on-board web interface, you do not need to install the
Remote Console Switch Software. If you have previously used the Remote
Console Switch Software, you can migrate the database to the on-board web
interface. See "Migrating Remote Console Switches to the On-board Web
Interface" on page 135.
NOTE:
Please ensure that all your Remote Console Switches have been upgraded to
their most recent version of firmware. For information on upgrading a Remote
Console Switch through the on-board web interface, please see "Upgrading
Firmware" on page 120.
Remote Console Switch Quick Setup Checklist
To set up the Remote Console Switch (see the "Remote Console Switch
Installation and Setup" on page 10:
1 Adjust mouse acceleration on each server to Slow or None.
2 Install the Remote Console Switch hardware, and connect a Server
Interface Pod (SIP) or an Avocent brand IQ module to each server or tiered
switch. Connect each SIP or IQ module to the Remote Console Switch
with CAT 5 cabling and connect the keyboard, monitor, and mouse
connectors to the Analog Port of the Remote Console Switch.
3 Connect a terminal to the configuration (serial) port on the back panel of
the Remote Console Switch and set up network configuration (set network
speed and address type). The IP address can be set here or from the
Remote Console Switch Software. Dell recommends using a static IP
address for ease of configuration.
2
Installation
9
Hide quick links:
Advertisement
Table of Contents
