Table of Contents
Advertisement
An Error Message Is Displayed on the LCD
An unsupported USB hub is connected.
Remove the hub.
B200
Printer error has occurred.
Unplug the power cord and contact the
service center.
****
Printer error has occurred.
Turn off power then back on again.
If problem persists, see the manual.
Document in ADF.
Redo operation after checking
document in ADF and pressing OK.
Document size is too long.
Redo operation after checking
document on ADF and pressing OK.
The card is currently writable from PC.
Set to [Not writable from PC].
may cancel printing. In such cases, disconnect and
reconnect the USB cable.
When printing from a PictBridge compliant device,
depending on the model or brand of your device, you may
have to select a PictBridge compliant print mode on the
device before connecting it to the machine. You may also
have to turn on your device or select Play mode manually
after connecting the device to the machine. Perform
necessary operations before connecting your device
referring to its instruction manual.
If the error is still not resolved, check if you can print
another photograph.
If a PictBridge compliant device is connected via a USB hub,
remove the hub and connect it directly to the machine.
Turn off the machine, and unplug the power cord of the
machine from the power supply.
Contact the service center.
Important
If you disconnect the power plug, all the documents
stored in memory are deleted.
"****" is displayed in the alphanumeric character and
depends on the error occurred.
5100/5110 is displayed:
Cancel printing, and turn off the machine. Then clear the
paper jam or foreign object that is preventing the Print
Head Holder from moving, and turn on the machine
again.
Important
Be careful not to touch the components inside the
machine. The machine may not print out properly if
you touch it.
If the problem is not resolved, contact the service
center.
In other cases:
Turn off the machine, and unplug the power cord of the
machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
The document is jammed in the ADF. Remove the document
page jammed in the ADF, then press the
again after resolving the error.
Document Jams in the ADF
The document is too long or is jammed in the ADF.
Remove the document page jammed in the ADF, then press
the
OK
button. After resolving the error, make sure that the
document you are loading meets the machine's
requirements before redoing the operation.
Document Jams in the ADF
The Card Slot is set to Writable from USB PC or Writable
from LAN PC.
You cannot print from the memory card or save the scanned
data to the memory card when the Card Slot is set to
Writable from USB PC or Writable from LAN PC. After writing
on the memory card, set to Not writable from PC again.
Page 826 of 997 pages
OK
button. Operate
Page top
Hide quick links:
Advertisement
Table of Contents
