Table of Contents
Advertisement
When the primary server is down during operation
A dial-up is generated because a connection to the primary
server is attempted periodically. Since this is attributable to
the automatic re-connection function, turn off the printer
once.
When the file server on the local network is down
When there is no file server on the local network, NetWare
cannot be used on the local network. In this case, the NetWare
protocol for the print server is also not available. No dial-up
is generated under this condition. When the file server on the
local network is restored, the print server is also automatically
restored.
For local networks with no file server:
Printer
Local network
Depending on the router settings, the NetWare protocol can be
used without a file server on a local network. This setup follows
the same pattern as that described above.
Dial-up
router
Dial-up
router
Remote network
Settings for NetWare Server
Primary file server
(primary print server)
161
6
6
6
6
6
6
6
6
6
6
6
6
Advertisement
Table of Contents
