HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual page 71
Hp elitebook 2530p notebook pc - maintenance and service guide
Hide thumbs
Also See for 2530p - EliteBook - Core 2 Duo 2.13 GHz:
- Quickspecs (46 pages) ,
- Specifications (45 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
Before removing the switch cover and keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the WWAN module compartment cover (see
6.
Remove the expansion memory module compartment cover (see
on page
50).
7.
Remove the hard drive bay cover (see
Remove the switch cover and keyboard:
1.
Position the computer with the rear panel toward you.
2.
Remove the Phillips PM2.5×6.0 screw (1) that secures the switch cover to the computer.
3.
Loosen the five Phillips PM2.5×11.0 captive screws (2) that secure the keyboard to the
computer.
4.
Turn the computer right-side up, with the front toward you.
5.
Open the display as far as possible.
Battery on page
46).
Primary hard drive on page
WWAN module on page
Expansion memory module
55).
Component replacement procedures
58).
63
- Quick Links:
- Switch Cover and Keyboard
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
