Table of Contents
Advertisement
StarBoard FX-DUO Series
Item
Model name
Detection method
Digitiser resolution
Sampling rate
Interface
Effective screen size (mm)
Board dimensions (mm)
Power consumption
Weight of main unit
Operating requirements
Storage requirements
Electronic pen (option)
Standards, etc.
*1 Using infrared and compact cameras, this product captures the image (shadow) of a pen or finger
and detects the corresponding coordinate position. Do not operate near lighting that will obstruct the
capture of the image. This includes:
・ Locations where direct sunlight strikes the board surface or comes from the side.
・ Locations with white incandescent lighting or strong infrared source directly overhead.
Depending on installation conditions or sensor property, position detection may be off by about
9 mm.
*2 The electronic pen uses infrared light having the same frequency (approx. 940 nm).
Do not operate this product in a location where other equipment (fluorescent lighting, plasma
displays, passive sensors, etc.) may emit a similar frequency.
*3 The expected battery lifetime may vary depending on initial battery conditions, humidity, and the
operating environment.
StarBoard FX-DUO-88W
Infrared image sensor system
0.05 mm
Approx. 100 points/second (when using USB 1.1 Full Speed)
USB 1.1 (cable length: 4.7 m)
Approx. 88 inches,
1,888 (W) × 1,180 (H)
2,054(W) × 1,390 (H) × 62 (D)
(not including the pen holder)
5 V，500 mA
Approx. 33 kg
+5°C – 35°C (Humidity: 20 – 80% RH, without condensation)
-10°C – +45°C (Humidity: 20 – 80% RH, without condensation)
Communication system: Infrared (Carrier wavelength: 56 kHz, IR
2
*
wavelength: 940 nm)
Side switches: 3
Power supply: AAA
Expected battery life: Approx. 80 hours of continuous use
)
(alkaline battery
Size: 149 mm × φ17 mm
Weight: Approx. 20 g (not including batteries)
VCCI Class B, FCC Class B, CE
3-9
Specification
1
*
Appendix
3
*
English
Hide quick links:
Advertisement
Table of Contents
