10. Program the following points up to point #4
in the same manner.
When programming, be sure that the points and splits specified
on the inside line are paired with those on the outside line
respectively.
If there are any points or splits not paired, the needle point
automatically returns to the previous point. Correct the program.
11. Press
.
12. Press
.
ESC
ESC
Inputting the end code
1. Select
with
2. Select the end code type with
press
.
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press
.
ESC
ESC
The work clamp returns to the home position.
Saving
1. Select
with
2. Select
with
3. Input the data number and press
4. Press
.
ESC
ESC
Ending program
1. Press
.
P
and press
.
and
and the work clamp
and press
.
and press
.
.
Programmer
Chapter 2 Programming with Help Function
51