Installing A Memory Card Reader Or A Diskette (Floppy) Drive - HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Manual

Upgrading and servicing guide

Hide thumbs Also See for -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER:

Table of Contents

Enlarged version

5 Hold the release tab down as you pull the cage

towards the back of the chassis, and then lift it

out (F). Removing the drive cage provides more

space to remove the cables.

6 Remove the cables attached to the back of the

drives in the drive cage.

7 Remove the screw from each side of the drive cage

to remove the memory card reader.

Remove the screw from each side of the drive cage

to remove the diskette drive.

8 Pull the drive out through the front of the

drive cage.

Installing a Memory Card Reader

or a Diskette (Floppy) Drive

The PC may have a fixed or a removable drive cage

that holds the memory card reader and the diskette

drive. If the drive cage is fixed, follow the first set of

instructions, "To install a drive (with a fixed drive

cage) (select models)" on page 7. If the drive cage is

removable, follow the second set of instructions, "To

install a drive (with a removable drive cage) (select

models)" on page 8.

To install a drive

(with a fixed drive cage)

(select models)

1 See "Removing a Memory Card Reader or the

Diskette (Floppy) Drive" on page 6.

Remove the faceplate of the drive bay.

2 Slide the drive inside of the drive cage through the

front of the PC. Make sure the connectors face

toward the back.

Upgrading and Servicing Guide

Table of Contents