Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DPG-2100 - Wireless Presentation Gateway
Summary of Contents for D-Link DPG-2100 - Wireless Presentation Gateway
- Page 1 Wireless Internet Camera Wireless G USB 2.0 Adapter with 3G Mobile Video...
-
Page 2: Package Contents
If any of the above items are missing, please contact your reseller. Minimum System Requirements • 900MHz or above based computer with a minimum of 256MB RAM with Windows XP (SP2) or 2000 (SP4). ® • IEEE 802.11b or 802.11g wireless-enabled computer. • Internet Explorer 5.x or above, Netscape 6.x or above, Mozilla 1.0 or above. • Projector or Monitor with VGA or DVI-D connector and VGA or DVI-D cable. D-Link DPG-100 Quick Install Guide... -
Page 3: Hardware Overview
A solid amber light indicates the Press and hold for 5 seconds device is in standby or is ready. to reset the device back to the default settings. A solid blue light indicates the device is active. VGA Connector Audio Jack Connect to a projector or Connect to speakers. monitor using a VGA cable. Power Receptor DVI Connector Ethernet Port Connect the supplied Connect to a projector Connect to the Internet power adapter. or monitor using a DVI to upgrade firmware. cable. D-Link DPG-100 Quick Install Guide... - Page 4 4. When the DPG-2100 is connected to a monitor or projector and fully booted, a banner screen will appear. The SSID will be displayed on the screen. The default SSID is projector-0. 5. Open your wireless utility for your adapter and connect to the projector using the displayed SSID (in infrastructure mode). Most wireless utilities offer a site survey. Click the site survey and connect to projector-0. D-Link DPG-100 Quick Install Guide...
-
Page 5: Utility Installation
Utility Installation Once you’ve established a wireless connection, open a web browser. The browser will automatically redirect to the software installation screen. Click Download Click Run D-Link DPG-100 Quick Install Guide... - Page 6 You may receive a Security Warning message. Click Run to continue. During the installation, your screen may flicker or turn black. Click Finish. D-Link DPG-100 Quick Install Guide...
-
Page 7: Wireless Utility Configuration
In a multi-presenter environment, to switch presenters, the first presenter must click Connect/Disconnect to disconnect. Then the next presenter can click Connect/Disconnect from his computer to take control of the projector. Click the Freeze button to take a screen shot of your computer (without the utility) which will display through the projector. Click Unfreeze to go back to normal display. Click the Hide button to display a black screen through the projecter. Click Unhide to go back to normal display. D-Link DPG-100 Quick Install Guide... - Page 8 Click Select Projector to bring up a list of available projectors. Click on the projector you want to use and then click Connect. Select Display Options to bring up the display properties of your computer. You may adjust the screen resolution and/or color quality. D-Link DPG-100 Quick Install Guide...
- Page 9 Select Settings to configure the projector settings such as password setup, firmware upgrade, network settings, and wireless settings. By default, there is no password. You may click Password Setup to enter a new password. This password will be needed only to access the Settings section. Select Upgrade Firmware to see if a new firmware is available. The DPG-2100 must be connected to the Internet via the Ethernet port. The device will automate the firmware upgrade process if a new firmware is available. D-Link DPG-100 Quick Install Guide...
- Page 10 The network settings are only for the Ethernet port on the DPG-2100. This is for downloading firmware upgrades and providing Internet access to presenters. By default, the device is set to Obtain an IP Address Automatically. If you are using static IP addresses on your network, enter the IP settings manually. The wireless settings will allow you to change the SSID and the Channel. You may use channels 1-11. The SSID must have the prefix of “projector-”. You can only change the number at the end. D-Link DPG-100 Quick Install Guide...
- Page 11 Check the Enter the Projector Access Number to begin projecting box to secure the DPG-2100 (refer to the top image on page 9). The access number will be displayed on the projected screen so only persons who are in visual contact with the display will be able to control the device. Enter the access number and click OK. The About page will show the current utility version. D-Link DPG-100 Quick Install Guide...
-
Page 12: Technical Support
Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Intel, the Intel logo and Intel Viiv are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.