8.10 Paper Jam Detection
You can set the degree of detection sensitivity for a jam at the feeder.
Configure the settings for Paper Jam Detection as follows:
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page
2.
Select the "Paper jam detection" setting on the [Device Setting 2] tab.
3.
Set the degree of detection sensitivity for a jam occurred at the feeder.
If you encounter frequent jams, set the setting to "Sensitivity-Low".
ATTENTION
186
8.10 Paper Jam Detection
166.
Setting to "Sensitivity-Low" reduces the detection accuracy for a paper
jam.
If you don't want to get your important document ripped or crumpled, be
sure to set the setting to "Normal" to scan the document.