D-Link DGE-530T User Manual page 21

Gigabit network adapter

Hide thumbs Also See for DGE-530T:

Table of Contents

Section - SNMP Agent

After choosing the D-Link DGE-530T Gigabit Ethernet Adapter and clicking OK, the user will be prompted with another

window to input some personal information. You may input this information now or to set this information later, simply

click OK. A brief explanation of this window may also be configured under the Option tab, which will be discussed later

in this chapter. After clicking OK, the D-Link Ethernet Adapter icon, shown below, should appear in the bottom right

hand tool bar of your computer screen.

Double-clicking the icon will open the Agent window, as shown below.

The Configuration Tab has two fields. The first field, "The agent is for:", allows the user to choose an Ethernet card

to configure, from a pull down menu. The "Current Status" is a read only field which displays the most recent action

made by the Ethernet card. Clicking the Error Log tab will open the following screen. The Error log will display packets

received by the DGE-530T, which were discarded due to an error. The user may choose to save these messages or

clear them, using the appropriate buttons.

D-Link DGE-530T User Manual

Table of Contents