Statically Assign An Ip Address - D-Link DFE-690TXD User Manual

32-bit fast ethernet cardbus notebook adapter

Hide thumbs Also See for DFE-690TXD:

Table of Contents

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps

below:

Step 1

Windows

2000/XP: Click on Start > Settings > Control Panel > Network Connections.

Windows Vista

: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage

Network Connections.

Windows

7: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change

Adaper Settings.

Step 2

Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP address and enter an IP address that is on the same

subnet as your network or the LAN IP address on your router.

Example: If the router´s LAN IP address is 192.168.0.1, make your IP address

192.168.0.X where X is a number between 2 and 254. Make sure that the number

you choose is not in use on the network. Set the Default Gateway the same as the

LAN IP address of your router (192.168.0.1).

Set the DNS server address provided by your ISP.

Step 5

Click OK twice to save your settings.

D-Link DFE-690TXD User Manual

Table of Contents