D-Link Express Ethernetwork DI-704P User Manual page 31

Broadband router with print server

Hide thumbs Also See for Express Ethernetwork DI-704P:

Table of Contents

Using the Configuration Menu (continued)

Advanced > Virtual Server

The DI-704P is also capable of port-redirection meaning incoming traffic to a particular

port may be redirected to a different port on the server computer. Each virtual services

that are created will be listed at the bottom of the screen in the Virtual Servers List.

There are already pre-defined virtual services already in the table. You may use them

by enabling them and assigning the server IP to use that particular virtual service.

Name:

The name referencing the virtual service.

Private IP:

The server computer in the LAN (Local Area Network) that will be providing the virtual

services.

Private Port:

The port number of the service used by the Private IP computer.

Protocol Type:

The protocol used for the virtual service.

Public Port:

The port number on the WAN side that will be used to access the virtual service.

Schedule:

The schedule of time when the virtual service will be enabled. The schedule may be

set to Always, which will allow the particular service to always be enabled. If it is set

to Time, select the time frame for the service to be enabled. If the system time is

outside of the scheduled time, the service will be disabled.

Example #1:

If you have a Web server that you wanted Internet users to access at all times, you

would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer

192.168.0.25. HTTP uses port 80, TCP.

Name: Web Server

Private IP: 192.168.0.25

Protocol Type: TCP

Private Port: 80

Public Port: 80

Schedule: always

Table of Contents