Connectors
SATA drives are compatible with SAS connectors, but SATA connectors will not accept SAS drives
(Figure B-2). Preventing SAS drives from connecting to a SATA network is important because SATA
drives are, without the intervention of port selectors, single-ported and cannot accommodate the dual-
ported pathways used by SAS drives. These blind-pluggable connectors enable a common topology
including controllers, HBAs, backplanes and both SAS and SATA drives. Such commonality permits
the implementation of dual-domain SAS technology by providing a single standard for all storage
network pathways.
Figure B-2
SAS and SATA connectors
.
SATA connector
SATA connector
SAS connector
SAS connector
Key
The key prevents SATA connectors
from accepting SAS drives
SATA
connector
SAS
connector
12