•
Hard drives
•
SAS backplane
•
USB memory keys
•
NIC hardware key
•
Expansion-card riser
•
Integrated storage controller card
•
iDRAC6 Express card
•
iDRAC6 Enterprise card
•
Power supplies
•
Fans
•
Processors and heat sinks
•
Memory modules
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 61.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 149.
8 If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 84.
9 Run the appropriate Embedded System diagnostic test. See "Running the
Embedded System Diagnostics" on page 140.
If the tests fail, see "Getting Help" on page 149.
Troubleshooting Your System
125